Pool Fence Cost in St. George (2026 Guide)

Home › Pool Fence Cost Guide

Please read this first: the numbers on this page are typical national estimates from published cost surveys, cited below. They are not our prices and not a quote. Real prices in St. George depend on your yard, the product and the installer. For an actual number, use the free quote form.

Typical cost per linear foot, installed

Fence type	Typical range per linear foot	Source
Mesh (often removable)	$10 – $30	HomeGuide (2026)
Aluminum	$30 – $45	HomeGuide (2026)
Tempered glass	$120 – $500	HomeGuide (2026)
Self-closing, self-latching gate (add-on)	$200 – $800 each	HomeGuide (2026)

Angi's 2026 data puts the national average pool fence project at about $4,000, with most homeowners spending $1,500 to $10,000. HomeGuide's national average range is $2,000 to $13,500 for 200 to 300 linear feet. Sources: HomeGuide pool fence cost and Angi pool fence cost. Sources disagree, especially on mesh, so treat these as ballpark figures.

A worked example

Say your pool deck needs about 120 linear feet of fence with one gate. Using the ranges above, before local factors:

• Mesh: 120 ft × $10–$30 ≈ $1,200 – $3,600, plus a gate if it's not included.
• Aluminum: 120 ft × $30–$45 ≈ $3,600 – $5,400, plus the gate.
• Glass: 120 ft × $120 and up ≈ $14,400 or more.

To estimate your own length, measure around the outside edge of the area you want fenced, not the edge of the water. Leave walking room on the deck, and remember a fence that cuts corners is often shorter.

What changes the price in St. George

• Fence height. St. George's pool permit checklist calls for at least 5 ft (60 in), which is taller than the 4 ft many national prices assume. Taller fences cost more. See the code guide.
• Deck surface. Plain concrete is easiest to drill. Pavers, travertine and stamped or coated decks take more care.
• Rock and caliche. Many Washington County yards have hard caliche or lava rock under the surface, which slows post-setting.
• Number of gates. Each self-closing gate adds cost.
• Shape and slope. Curves, corners and hillside steps add labor.
• Distance. Outlying areas like Cedar City or Mesquite may involve travel time.
• Upkeep. Southern Utah's hard water spots glass, so plan for cleaning costs and time.
• Permits. HomeGuide lists typical fence permit fees of $40 to $150. Ask your city for the local fee.

Ways to save

1. Fence only the pool area, not the whole yard, if your city allows it.
2. Choose mesh if you need a lower-cost, child-focused barrier.
3. Plan the fence with a new pool build so sleeves or posts go in before pavers are finished.
4. Get a quote in the cooler months, when demand is usually lower.
5. Use one gate instead of two when the layout allows it.

Mesh vs. aluminum vs. glass: is the higher price worth it?

Mesh costs the least and is great for families with little kids. Aluminum lasts longest with little upkeep. Glass looks the best and keeps the view, but costs the most. Compare them side by side in permanent vs. removable pool fences, or see the aluminum and glass pages.

Frequently asked questions

How much does a pool fence cost in St. George?

National surveys put most pool fence projects between about $1,500 and $13,500, depending mostly on length and material. St. George's 5 ft height requirement and local ground conditions can push prices up. Get a free quote for your yard.

What's the cheapest pool fence?

Mesh is usually the lowest-cost pool safety fence. HomeGuide lists about $10 to $30 per linear foot installed.

Are these your prices?

No. These are typical national estimates from published sources, shown for planning only. Your quote depends on your yard and the installer.

Is a gate included?

It depends on the installer. HomeGuide lists self-closing gates at about $200 to $800 each when priced separately.